DesignClip or latch
A 3D model of a replacement clip or latch, made from your measurements or photos for 3D printing
Pricefrom $13
Leg foot or cap3D Modeling
Payment protectionDetails
- Revisions within the package are free.
- If you do not respond within 3 days of delivery, the work is accepted automatically.
The money is reserved when you pay and released only once you accept the work.
Example result
Example for the Standard package
A shelf bracket with countersunk screw holes
The bracket from two sides
Seen from above
Size: 24 × 60 × 60 mm, one part. Files:
- model.stl and model.3mf;
- model.obj, model.glb and outline.dxf;
- model.js, with the legs, the hole positions and the screw sizes at the top;
- a README.
The README suggests printing it on its side so the layers run along the legs, in PETG with 40% infill and 4 walls. It is a bracket for light shelves, and its strength depends on the plastic and the printing.
Client: someone who needed one more bracket like the ones under their kitchen shelf, to the same size. Task: an L-shaped bracket with 60 mm legs, 24 mm wide and 5 mm thick, with a rib in the corner and two holes per leg for 4 mm wood screws, countersunk so the heads sit flush.
The client and all details are made up.
About this service
A 3D model of a foot, a glide or an end cap for the leg of a chair, a stool, a table or a cabinet, so the leg does not scratch the floor or slide. It can slip over the leg, go into the end of a round or square tube, sit flat under a leg that leans, and have a pocket for a felt pad. You give the leg's outer or inner size, its shape, its angle if it leans and how thick the foot may be, in mm. You get a ZIP archive: STL and 3MF to print, OBJ, GLB, a DXF outline, the code with the sizes at the top, a README with printing advice and pictures from four sides. From Standard the file holds 2 or 3 leg sizes to test the fit. Strength and wear depend on the material. We do not make risers, leg extensions or anything that holds the leg together. We do not print or ship parts.
What is included
- What you getA ZIP archive with model.stl and model.3mf for 3D printing, model.obj for 3D editors, model.glb for viewing on the web and in augmented reality, outline.dxf with the outline seen from above for CAD and laser cutting, model.js with the main sizes as named numbers at the top, a README with printing advice and 4 PNG pictures of the 3D model from four sides, also shown on the order page. Size variants and a separate sole lie side by side, ready to print.
- Over or into the legSlips over a solid leg or into the end of a round or square tube
- Legs that leanThe sole follows the angle you measure, so it sits flat on the floor
- Room for feltA shallow pocket for a felt pad of the size you give
- Fit variantsFrom Standard, 2 or 3 leg sizes side by side to find a snug fit
- Printing adviceWhich side down, supports, layer height, infill and material, in the README
How it works
- 1MeasurementsYou measure the leg end and its angle to the floor
- 23D modelWe build the 3D model and check that it is a closed solid of the sizes you asked for
- 3Try itYou print the variants and try them on one leg
- 4ChangesYou send what to change, with measurements, within your package
What we need from you
The furniture and the leg: solid or a tube, round, square or rectangular. The leg's outer size in mm, or for a tube plug its inside size and wall thickness, ideally measured with a caliper. If the leg leans, its angle to the floor, or a photo from the side with a set square next to it. How thick the foot may be. Whether you want a pocket for a felt pad, and the pad's size and thickness. The floor: wood, tile or carpet. A photo of the leg end with a ruler.
We will ask you:
- What furniture, and what kind of leg?
- The leg's size, in mm
- Does the leg lean?
- Felt pad and floor
Compare packages
| Packages | BasicSimple cap$13 | StandardFoot with fit variants$25 | PremiumFoot with a sole$47 |
|---|---|---|---|
| Deadline | 1 day | 2 days | 3 days |
| Revisions | 1 | 2 | 3 |
| Parts | 1 | 1 | up to 2 |
| Size variants in the file (e.g. a hole at 5.0 / 5.2 / 5.4 mm to test the fit) | 1 | 2 | 3 |
| Holes, slots and cut-outs | up to 4 | up to 12 | up to 25 |
| Rounded edges and chamfers | No | Yes | Yes |
| Files | STL, 3MF, OBJ, GLB, DXF | STL, 3MF, OBJ, GLB, DXF | STL, 3MF, OBJ, GLB, DXF |
| Pictures from 4 sides | Yes | Yes | Yes |
| Leg end size and angle | your sizes | your sizes | your sizes |
| Order Basic | Order Standard | Order Premium |
Payment protection
You pay when you order, but the money is released only for accepted work.
- Fixed priceThe package price does not change after you pay.
- The money is reservedWhen you pay, the amount is only reserved. It is released to the service once you accept the work.
- Checked before deliveryEvery result goes through a quality check before it reaches you, and you see it on the order page before accepting it.
- Free revisionsAsk for changes within your brief as many times as the package allows.
- Acceptance after 3 daysIf within 3 days of delivery you neither accept the work nor ask for changes, it is accepted automatically. If you write in the order chat after delivery, the order waits; once we answer, we may start the 3 days again and will say so in the chat.
- Redo or a full refundIf the result does not match your brief and the revisions did not fix it, or the work takes more than twice its deadline, write in the order chat: we will redo the work or refund the payment in full.
Questions and answers
Can it raise or level a short leg?
No. We make thin feet and caps that protect the floor, not risers, extensions or wedges that raise or level furniture. A chair holds a person, so a part its height or strength depends on is safety-critical, and we do not make it.
Which material should I print it in?
The README gives advice for your floor and use. A softer, flexible plastic grips the leg and is quieter; a harder one slides more easily. Wear depends on the material and the printing, and we cannot promise how long a foot lasts.
What if it is loose on the leg?
Print the size variants from the Standard package and keep the one that sits snugly. We never guess the leg's size: if it is missing, we ask. If none fits, measure again and ask for a change within your package.
Can you copy the feet of my chair's brand?
We make a replacement for your own furniture from your measurements. We do not make copies to be sold as the brand's original parts.
Do you print them?
No. You get the files and print them yourself or at a print shop. We do not edit an STL you send either: we build a new 3D model from your sizes.
Did not find your answer?
Design
DesignGear or pulley
A 3D model of a simple spur gear or pulley from your tooth count, module and bore, for 3D printing
Pricefrom $13
DesignDrawer insert
A 3D model of a drawer insert with compartments, made to the inside of your drawer for 3D printing
Pricefrom $13
DesignSmall parts box
A 3D model of a box with compartments for screws, nuts and small parts, made to your sizes for 3D printing
Pricefrom $13