A 3D model of a desk organizer for pens and stationery, with sections made to the things you keep in it

Example result

Example for the Standard packageShow in full

A phone stand with a cable slot for a desk at home

The model from two sides

Seen from above

Size: 80 × 85 × 87 mm, one part, about 122 cm³ of plastic. Files: a ZIP archive with model.stl and model.3mf for printing, model.obj, model.glb, outline.dxf, model.js with the sizes as named numbers (width, angle, channel for the phone) and a README. The README says to print it lying on its side with no supports, at 0.2 mm layers and 15–20% infill, in PLA or PETG.

Client: someone who wanted a stand on their desk for a phone in a thick case. Task: a stand for a phone 12 mm thick with its case, leaning back at 60°, with a lip so it does not slide and a slot for the charging cable; 80 mm wide, printed in one piece.

The client and all details are made up.

About this service

A 3D model of an organizer that stands on your desk and keeps pens, pencils, markers, scissors, a ruler, sticky notes and clips each in its place. The holes and sections are made to the things you put in them: the diameter of your pens, the size of the sticky note pad, the length of the scissors, and the footprint you have room for on the desk. From the Standard package the edges are rounded and the organizer can be split into parts that sit side by side with a 0.2-0.4 mm gap. You get a ZIP archive with STL and 3MF files, OBJ, GLB, a DXF outline, the code with the sizes at the top, a README with printing advice and pictures from four sides. The shape is geometric, with walls of at least 1.2 mm; sections carry no names or icons. A large organizer must fit your printer's build area, so give it. We do not print or ship anything.

What is included

• What you getA ZIP archive with model.stl and model.3mf to print, model.obj for 3D editors, model.glb for viewing on the web and in augmented reality, outline.dxf with the outline seen from above, model.js with the size of every section as named numbers at the top, a README with printing advice and 4 PNG pictures from four sides. Several parts lie side by side, ready to print separately.
• Sections for your thingsHoles and pockets sized to the pens and items you list
• Fits your deskWithin the width, depth and height you give, in mm
• Modules that fit togetherParts that sit side by side or in a base with a 0.2-0.4 mm gap, from Standard
• Fits your printerA large organizer is split into parts to suit your build area
• Printing adviceWhich side down, supports, layer height, infill and material, in the README

How it works

1. 1
   Your listYou send what goes in it, the sizes of each item and the space on the desk
2. 2
   3D modelWe build the 3D model and check that it is a closed solid of the sizes you asked for
3. 3
   CheckYou check the sections in the pictures and the README and print it
4. 4
   ChangesYou send what to change, with measurements, within your package

What we need from you

What it holds, item by item, with sizes in mm: the diameter of your thickest pen or marker, the size of the sticky note pad, the length and width of the scissors, a ruler, a phone or business cards if it holds them. The space you have on the desk, width and depth, and the highest it may be. How many sections there are and how they are arranged, as a sketch if you can. The build area of your printer if the organizer is large, and the material, if you know it.

We will ask you:

• What will it hold?
• Sizes of the items, in mm
• Space on the desk
• How should it be arranged?
• Your printer and material

Compare packages

Questions and answers

Did not find your answer? Ask us