A 3D model of a knob or handle for a drawer or cabinet door, made to your screws and holes for 3D printing

Example result

Example for the Standard packageShow in full

A shelf bracket with countersunk screw holes

The bracket from two sides

Seen from above

Size: 24 × 60 × 60 mm, one part. Files:

• model.stl and model.3mf;
• model.obj, model.glb and outline.dxf;
• model.js, with the legs, the hole positions and the screw sizes at the top;
• a README.

The README suggests printing it on its side so the layers run along the legs, in PETG with 40% infill and 4 walls. It is a bracket for light shelves, and its strength depends on the plastic and the printing.

Client: someone who needed one more bracket like the ones under their kitchen shelf, to the same size. Task: an L-shaped bracket with 60 mm legs, 24 mm wide and 5 mm thick, with a rib in the corner and two holes per leg for 4 mm wood screws, countersunk so the heads sit flush.

The client and all details are made up.

About this service

A 3D model of a knob or a handle for a drawer, a cabinet door or a box lid, made to fit the screws and holes you already have. It can be a round or square knob, a bar handle on two posts, a handle with a hexagonal pocket for a nut, or a backplate that covers old holes. You give the screw size, the distance between the hole centres, the thickness of the door or drawer front and the size you want, in mm. You get a ZIP archive: STL and 3MF to print, OBJ, GLB, a DXF outline, the code with the sizes at the top, a README with printing advice and pictures from four sides. The shapes are geometric: no carved, floral or figurine knobs and no lettering. Strength depends on the material and the printing, and a printed handle may soften near heat. We do not print or ship handles.

What is included

• What you getA ZIP archive with model.stl and model.3mf for 3D printing, model.obj for 3D editors, model.glb for viewing on the web and in augmented reality, outline.dxf with the outline seen from above for CAD and laser cutting, model.js with the main sizes as named numbers at the top, a README with printing advice and 4 PNG pictures of the 3D model from four sides, also shown on the order page. A handle and its backplate lie side by side, ready to print separately.
• Knobs and bar handlesRound, square or a bar on two posts, at your hole spacing
• Fits your screwsA hole for the screw or a pocket for its nut, sized from your numbers
• BackplateIn Premium, a plate that hides old holes or protects the paint
• Comfortable edgesRounded edges and chamfers for the fingers, from Standard
• Printing adviceWhich side down, supports, layer height, infill and material, in the README

How it works

1. 1
   MeasurementsYou measure the screws, the hole spacing and the door or drawer front
2. 2
   3D modelWe build the handle to those sizes and check that it is a closed solid
3. 3
   Try itYou print it and try it on the drawer with your own screws
4. 4
   ChangesYou send what to change, with measurements, within your package

What we need from you

What you need: a knob, a bar handle or a handle with a backplate, and what it goes on. The screw you will use: its diameter and length, and the nut if there is one. For a bar handle, the distance between the centres of the two holes. The thickness of the door or drawer front. The size you want: the knob's diameter and height, or the handle's length, height and grip width, in mm. A photo of the old handle with a ruler, or a sketch with sizes. Whether it is near heat, such as a stove or a radiator.

We will ask you:

• Knob, bar handle or handle with a backplate?
• Your screw and hole spacing, in mm
• The handle's size, in mm
• Thickness of the door or drawer front
• Your printer and material

Compare packages

Questions and answers

Did not find your answer? Ask us