DesignDesk organizer
A 3D model of a desk organizer for pens and stationery, with sections made to the things you keep in it
Pricefrom $13
Cable clips and organizers3D Modeling
Payment protectionDetails
- Revisions within the package are free.
- If you do not respond within 3 days of delivery, the work is accepted automatically.
The money is reserved when you pay and released only once you accept the work.
Example result
Example for the Standard package
A phone stand with a cable slot for a desk at home
The model from two sides
Seen from above
Size: 80 × 85 × 87 mm, one part, about 122 cm³ of plastic. Files: a ZIP archive with model.stl and model.3mf for printing, model.obj, model.glb, outline.dxf, model.js with the sizes as named numbers (width, angle, channel for the phone) and a README. The README says to print it lying on its side with no supports, at 0.2 mm layers and 15–20% infill, in PLA or PETG.
Client: someone who wanted a stand on their desk for a phone in a thick case. Task: a stand for a phone 12 mm thick with its case, leaning back at 60°, with a lip so it does not slide and a slot for the charging cable; 80 mm wide, printed in one piece.
The client and all details are made up.
About this service
A 3D model of clips and organizers that keep cables tidy on a desk, behind a TV or in a workshop: a clip for the desk edge, a comb that keeps several cables in a row, a holder that screws under the desk top or a clip for a bundle. Each slot is made to the cable diameter you measure, and if you want, its opening is a little narrower than the cable so the cable clicks in. You give the diameters, how many cables go in each clip, and how it is fixed: screws, double-sided tape or the edge of a desk of a given thickness. You get a ZIP archive with STL and 3MF files, OBJ, GLB, a DXF outline, the code with the sizes at the top, a README with printing advice and pictures from four sides. How well a clip bends and holds depends on your material and print, and is not guaranteed. No lettering on the clips; we do not print or ship them.
What is included
- What you getA ZIP archive with model.stl and model.3mf to print, model.obj for 3D editors, model.glb for viewing on the web and in augmented reality, outline.dxf with the outline seen from above, model.js with every cable diameter as a named number at the top, a README with printing advice and 4 PNG pictures from four sides. Different clips lie side by side, ready to print separately.
- Made to your cablesEach slot to the diameter you measured; flat cables by width and thickness
- Clicks inAn opening a little narrower than the cable, if you want it to click in
- Fixed your wayScrew holes, a slot for the desk edge or a flat back for tape
- Copies in your slicerOne clip in the file, printed as many times as you need
- Printing adviceWhich side down, supports, layer height, infill and material, in the README
How it works
- 1Cable sizesYou send the diameters, the number of cables and how the clip is fixed
- 23D modelWe build the 3D model and check that it is a closed solid of the sizes you asked for
- 3Test clipYou print one clip and try your cables in it
- 4ChangesYou send what to change, with measurements, within your package
What we need from you
What the cables are and where they go: along the desk edge, under the desk top, behind a TV or on a wall. The outer diameter of each cable in mm, measured with a caliper if you have one, and for flat cables the width and thickness. How many cables each clip holds. How it is fixed: the screw size, the thickness of the desk top for a clip on its edge, or the size of the tape pad. A photo of the spot with a ruler helps. The material, if you know it.
We will ask you:
- Which cables, and where?
- Cable sizes in mm
- How is it fixed?
- How many different clips?
- Your printer and material
Compare packages
| Packages | BasicOne clip$13 | StandardClip with a cover$25 | PremiumOrganizer set$47 |
|---|---|---|---|
| Deadline | 1 day | 2 days | 3 days |
| Revisions | 1 | 2 | 3 |
| Parts in the file | 1 | up to 2 | up to 4 |
| Holes, slots and cut-outs | up to 5 | up to 15 | up to 30 |
| Rounded edges and chamfers | No | Yes | Yes |
| Parts that fit together, with a fit gap | No | Yes | Yes |
| Files | STL, 3MF, OBJ, GLB, DXF | STL, 3MF, OBJ, GLB, DXF | STL, 3MF, OBJ, GLB, DXF |
| Pictures from 4 sides | Yes | Yes | Yes |
| Printing advice (README) | Yes | Yes | Yes |
| Cable diameter | your size in mm | your size in mm | your size in mm |
| Order Basic | Order Standard | Order Premium |
Payment protection
You pay when you order, but the money is released only for accepted work.
- Fixed priceThe package price does not change after you pay.
- The money is reservedWhen you pay, the amount is only reserved. It is released to the service once you accept the work.
- Checked before deliveryEvery result goes through a quality check before it reaches you, and you see it on the order page before accepting it.
- Free revisionsAsk for changes within your brief as many times as the package allows.
- Acceptance after 3 daysIf within 3 days of delivery you neither accept the work nor ask for changes, it is accepted automatically. If you write in the order chat after delivery, the order waits; once we answer, we may start the 3 days again and will say so in the chat.
- Redo or a full refundIf the result does not match your brief and the revisions did not fix it, or the work takes more than twice its deadline, write in the order chat: we will redo the work or refund the payment in full.
Questions and answers
I need 20 clips. Is that one part?
Yes: you get one clip and print as many copies as you need; your slicer can place the copies on the bed. Clips of different shapes or sizes count as separate parts.
Will the clip hold the cable firmly?
Each slot is made to the diameter you give, but the hold depends on your material and print. Print one first and try it; if it is too tight or too loose, send the measured difference and ask for a change.
Can it hold flat cables or a thick bundle?
Yes: for a flat cable give its width and thickness, for a bundle the diameter of the whole bundle in mm. We never guess these sizes.
Can the clips be labelled or colour-coded?
The 3D model carries no lettering. Print clips in different filament colours, or add text in your slicer or a 3D editor.
Do you print them?
No. We make the 3D model and its files; you print them yourself or order printing. We do not print, sell or ship anything, and we do not edit an STL of a clip you found.
Did not find your answer?
Design
DesignPlant pot and tray
A 3D model of a plant pot with a drip tray, made to your sizes: round, square or hexagonal, with drainage holes
Pricefrom $13
DesignPegboard tool holders
A 3D model of tool holders for your pegboard or wall, made to the hole pitch and your tools' sizes
Pricefrom $13
DesignSingle-board computer case
A 3D model of a case for your single-board computer: openings for its ports, posts for its screws and vents
Pricefrom $13