A 3D model of a wall holder for keys and small things: hooks, a shelf or a tray, made to your sizes

Example result

Example for the Standard packageShow in full

A phone stand with a cable slot for a desk at home

The model from two sides

Seen from above

Size: 80 × 85 × 87 mm, one part, about 122 cm³ of plastic. Files: a ZIP archive with model.stl and model.3mf for printing, model.obj, model.glb, outline.dxf, model.js with the sizes as named numbers (width, angle, channel for the phone) and a README. The README says to print it lying on its side with no supports, at 0.2 mm layers and 15–20% infill, in PLA or PETG.

Client: someone who wanted a stand on their desk for a phone in a thick case. Task: a stand for a phone 12 mm thick with its case, leaning back at 60°, with a lip so it does not slide and a slot for the charging cable; 80 mm wide, printed in one piece.

The client and all details are made up.

About this service

A 3D model of a holder for the wall by your door: a strip with hooks for keys and, if you want, a small shelf or tray for a wallet, letters, sunglasses or a phone. You give the sizes: the width and height you have room for, how many hooks and how far apart, the size of what goes on the shelf, and the screws you will hang it with, so the holes match them. It can also have round pockets for magnets of the size you give. You get a ZIP archive with STL and 3MF files, OBJ, GLB, a DXF outline, the code with the sizes at the top, a README with printing advice and pictures from four sides. The shape is geometric, with no figurines and no lettering, so a word like 'Keys' is added in your slicer. It is for keys and light things: how it holds depends on your wall, screws, material and print, and is not guaranteed. We do not print or ship it.

What is included

• What you getA ZIP archive with model.stl and model.3mf to print, model.obj for 3D editors, model.glb for viewing on the web and in augmented reality, outline.dxf with the outline seen from above, model.js with the width, hook spacing and screw holes as named numbers at the top, a README with printing advice and 4 PNG pictures from four sides. Several parts lie side by side, ready to print separately.
• Hooks where you want themSpaced as you ask and angled up, so keys do not slip off
• A shelf or traySized to what you put on it; as a separate part from Standard
• Holes for your screwsMade to your screw size, with a countersink from Standard
• Flat backIt sits flat on the wall and prints back side down, walls of at least 1.2 mm
• Printing adviceWhich side down, supports, layer height, infill and material, in the README

How it works

1. 1
   SizesYou send the width, the hooks, what goes on the shelf and your screw size
2. 2
   3D modelWe build the 3D model and check that it is a closed solid of the sizes you asked for
3. 3
   CheckYou check the sizes in the pictures and the README and print a test piece
4. 4
   ChangesYou send what to change, with measurements, within your package

What we need from you

What it should hold: how many sets of keys, and what goes on the shelf, such as a wallet, letters or glasses, with their sizes in mm. The width and height you have room for on the wall, how many hooks and the gap between them. The screws or wall plugs you will use: the screw diameter and the head size. If it holds magnets, their diameter and thickness. A sketch with sizes or a photo of the spot with a ruler helps. The material, if you know it.

We will ask you:

• What should it hold?
• Its size and the hooks, in mm
• How does it go on the wall?
• Anything else that matters
• Your printer and material

Compare packages

Questions and answers

Did not find your answer? Ask us