DesignHeadphone holder
A 3D model of a headphone stand or an under-desk hook, made to your headphones and your desk
Pricefrom $13
Phone or tablet stand3D Modeling
Payment protectionDetails
- Revisions within the package are free.
- If you do not respond within 3 days of delivery, the work is accepted automatically.
The money is reserved when you pay and released only once you accept the work.
Example result
Example for the Standard package
A phone stand with a cable slot for a desk at home
The model from two sides
Seen from above
Size: 80 × 85 × 87 mm, one part, about 122 cm³ of plastic. Files: a ZIP archive with model.stl and model.3mf for printing, model.obj, model.glb, outline.dxf, model.js with the sizes as named numbers (width, angle, channel for the phone) and a README. The README says to print it lying on its side with no supports, at 0.2 mm layers and 15–20% infill, in PLA or PETG.
Client: someone who wanted a stand on their desk for a phone in a thick case. Task: a stand for a phone 12 mm thick with its case, leaning back at 60°, with a lip so it does not slide and a slot for the charging cable; 80 mm wide, printed in one piece.
The client and all details are made up.
About this service
A 3D model of a desk stand for your phone or tablet, to print yourself. It holds the device at the angle you choose, upright or on its side, with a lip at the front so it does not slide off and, if you want, a slot for the charging cable or an opening by the speaker. You give the sizes it depends on: the width and thickness of the device in its case, where the charging port is, and the angle. You get a ZIP archive with STL and 3MF files for your slicer, OBJ, GLB, a DXF outline, the code with the sizes at the top, a README with printing advice and pictures from four sides. The shape is geometric, with walls of at least 1.2 mm, and no lettering or logos go on it. We do not print or ship the stand and do not edit an STL of a stand you already have. Check the sizes in the pictures and print a test piece first.
What is included
- What you getA ZIP archive with model.stl and model.3mf to print, model.obj for 3D editors, model.glb for viewing on the web and in augmented reality, outline.dxf with the outline seen from above, model.js with the angle and your device's sizes as named numbers at the top, a README with printing advice and 4 PNG pictures from four sides, also shown on the order page.
- Your angleUpright or tilted back at the angle you give, for reading, videos or calls
- Fits the device in its caseA slot made to the thickness you measured, with a lip at the front
- Room for the cableA slot or an opening where your charging port is
- A wide baseSized to your device's height and the angle, walls of at least 1.2 mm
- Printing adviceWhich side down, supports, layer height, infill and material, in the README
How it works
- 1Device sizesYou send the width and thickness in its case, the port position and the angle
- 23D modelWe build the 3D model and check that it is a closed solid of the sizes you asked for
- 3Test printYou check the sizes in the pictures and print the stand or a test piece of the slot
- 4ChangesYou send what to change, with measurements, within your package
What we need from you
The device and how it should stand: upright or on its side, and the angle from the desk. In mm: the width, height and thickness of the device in the case you use, and where the charging port and the speakers are, measured from one corner. Whether you want a cable slot, and on which side. If the stand is for two devices, the same sizes for each. A photo of the device next to a ruler helps. The material you will print in, if you know it.
We will ask you:
- Which device, and how should it stand?
- Device sizes in its case, in mm
- Where are the charging port and speakers?
- Angle and extras
- Your printer and material
Compare packages
| Packages | BasicOne-piece stand$13 | StandardStand with rounded edges$25 | PremiumStand for several devices$47 |
|---|---|---|---|
| Deadline | 1 day | 2 days | 3 days |
| Revisions | 1 | 2 | 3 |
| Parts in the file | 1 | up to 2 | up to 4 |
| Holes, slots and cut-outs | up to 5 | up to 15 | up to 30 |
| Rounded edges and chamfers | No | Yes | Yes |
| Parts that fit together, with a fit gap | No | Yes | Yes |
| Files | STL, 3MF, OBJ, GLB, DXF | STL, 3MF, OBJ, GLB, DXF | STL, 3MF, OBJ, GLB, DXF |
| Pictures from 4 sides | Yes | Yes | Yes |
| Printing advice (README) | Yes | Yes | Yes |
| Device thickness with its case | your size in mm | your size in mm | your size in mm |
| Order Basic | Order Standard | Order Premium |
Payment protection
You pay when you order, but the money is released only for accepted work.
- Fixed priceThe package price does not change after you pay.
- The money is reservedWhen you pay, the amount is only reserved. It is released to the service once you accept the work.
- Checked before deliveryEvery result goes through a quality check before it reaches you, and you see it on the order page before accepting it.
- Free revisionsAsk for changes within your brief as many times as the package allows.
- Acceptance after 3 daysIf within 3 days of delivery you neither accept the work nor ask for changes, it is accepted automatically. If you write in the order chat after delivery, the order waits; once we answer, we may start the 3 days again and will say so in the chat.
- Redo or a full refundIf the result does not match your brief and the revisions did not fix it, or the work takes more than twice its deadline, write in the order chat: we will redo the work or refund the payment in full.
Questions and answers
Can you take my phone's sizes from its published specs?
We work only from sizes you give. A published size is without a case, and a case adds thickness, so measure the device in the case you use. If a size the fit depends on is missing, we ask you.
Can it hold a wireless charging pad?
Yes: a flat seat for a pad of the size you give, with a channel for its cable. We make only the stand; we do not make or wire any electronics.
Will it hold a heavy tablet?
The stand is sized to your device, with walls of at least 1.2 mm, but its strength depends on your material and printing settings and is not guaranteed. For a large tablet, ask for a wider base; the README gives infill advice.
Can you put my name or logo on the stand?
No, the 3D model carries no lettering, logos or pictures. You can add text in your slicer, such as Cura or PrusaSlicer, or in a 3D editor before printing.
Do you print it?
No. We make the 3D model and its files; you print it yourself or order printing. We do not print, sell or ship anything, and we do not edit an STL you send: we build a new 3D model from your sizes.
Did not find your answer?
Design
DesignWall key holder
A 3D model of a wall holder for keys and small things: hooks, a shelf or a tray, made to your sizes
Pricefrom $13
DesignCable clips and organizers
A 3D model of cable clips and organizers made to your cable diameters: desk clips, cable combs and holders
Pricefrom $13
DesignDesk organizer
A 3D model of a desk organizer for pens and stationery, with sections made to the things you keep in it
Pricefrom $13